The EVE AUDIO SC205 it's a SilverCone two-way system with a 5" woofer. With an extended bass frequency response and an astounding output level, the SC205 will easily fill your room with exceptional sound.
The SC205 also comes with the convenience of threaded screw inserts on the bottom and the back. That way, the SC205 can be mounted on a regular microphone or speaker stand, or use the back plate for different wall mounting options available on the market.
The SC205 uses our 5" SilverCone woofer for an extended bass response. This very stiff diaphragm is honeycomb structured and glass fibre coated. The SC205 is driven by a sophisticated low distortion copper cap magnet system that uses a 1" voice coil responsible for delivering a greater linear excursion. All in all, this produces a bigger dynamic range than you would naturally assume from a speaker of these proportions. The result is an unsurpassed audio transparency that, when coupled with our proprietary AMT tweeter and PWM amplifier, will surprise you with a very powerful and precise low end.
The EVE AMT (Air Motion Transformer) tweeter offers preciseness and detail in the high frequency, along with the general tightness of the bass and mid-range frequencies, makes the SC205 equally adequate for use on the road or in studio.
The SC205 has a high resolution DSP electronics. One push knob operation and you will access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. The DSP engine is supported with a high quality A/D converter (24bit/192kHz) from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary.
One of the downside effects of port compression is bass distortion. As you turn up the volume, the efficiency of the port reduces and distortion will increase. EVE opted for a large rear rectangular port with no hard edges for our bass port designs. That's one of the reasons EVE monitors have a high efficiency on the lower frequencies.